PD132 Inductive Vehicle Single Loop Detector for Car Parking System Automatic opener barrier gate
Vehicle Single Loop Detector Specs:
- Supply voltage: 220V AC , 110V AC, 24V DC/AC, 12V DC/AC
- Voltage tolerance AC: +10% / -15%
- Voltage tolerance DC: ±15%
- Power Consumption: 4.5VA
- Output relays: 240V/5A
- Operating temperature: -20°C to +65°C
- Storage temperature: -40°C to +85°C
- Frequency range: 20kHz to 170 kHz
- Reaction time: 10ms
- Signal holding time: Unlimited / limited when loop is permanently covered 10 minutes
- Sensitivity: Adjustable in 4 increments
- Loop inductance: Total loop plus connection wiring: 50μH to 1000μH. Ideal is 100μH to 300μH
- Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter
- Size of Housing: 78x40x108 mm (L x W x H)
Application
Automatic Gate
Traffic Light System
Gate Drive Mechanisms
Operating Barriers
Parking Guidance System
Activating Card Dispensers in Parking Lots
Technical parameters of Loop Detector
| Model | PD132 |
| Brand | SINOMATIC |
| Color | Black |
| Power supply | 230V AC 115V AC 24V DC/AC 12V DC/AC |
| Frequency range | 20KHz ~ 170KHz |
| Sensitivity | Adjustable in 4 increments |
| Reaction time | 10ms |
| Channel | Single |
| Operating temperature | -40ºC ~ +80º |
| Relative humidity | <90% |
| Environmental compensation | Automatic drift compensation |
| Output mode | electric relay |
| Loop inductance | Ideal is 100μH to 300μH(Connection included) |
| Size of Housing | 78x40x108 mm (L x W x H)
|
Main Features
♦ Industrial engineering design concept
♦ Standard industrial guide installation
♦ Strong anti-jamming ability and stability
♦ Variety of output interface adapted to different scene
♦ Variety of shape choice meet differentiation demand
♦ High temperature stability
♦ Environment drift automatic compensation function
♦ Coil automatic fault detection function
♦ When the DIP switch is on position or changing the presence output time, Self-detection would be done
♦ ABS align to the pillar which can combine with each other compactly
♦ Presence output time can be adjustable
♦ Work mode can be set by the DIP switch
♦ Pulse output or permanent output can be adjustable
Work indicator
Detector will enter into the self-calibration condition with the green LED flash, red LED extinguish once on power, this procession will last 1 second. .the vehicle should not on the loops within the self-calibration. The green LED will not flash, he red LED extinguish after self-calibration. When the vehicle past over the loop ,the red LED on.
Product Tags:
|
|
Access Control 4.5VA PD132 Inductive Single Loop Detector 20kHz Images
|
